DescriptionFeatures & details
Larger Size for Upgraded Capacity: The cleaning volume of the cleaning basket has been increased by approximately 13.4% to 7.6 litres compared to the Anycubic Wash & Cure Plus, and the total volume of the cleaning drum is 12 litres, making it suitable for light-curing 3D printers of 10.6 inches and smaller. The curing size has increased by 42% to ?220*260 mm, allowing for single post-processing of larger and more models.
Dual Layer Design Saves IPA: ANYCUBIC has adopted a new dual layer curing platform for improved curing efficiency, increasing the number of models cured per cycle. The double-layer PP material cleaning basket supports cleaning together with the platform. Equipped with two adjustable heights, 150 mm and 250 mm, allowing for printing platforms from 6.6 to 10.6 inches, maximising the efficiency of alcohol usage.
Cure Enhancement: ANYCUBIC Wash & Cure 3 Plus features a new lambda bead arrangement combined with a lens light source. Compared to its predecessor, ANYCUBIC Wash & Cure Plus, it offers a 20% improvement in curing uniformity. The innovative Flexicure gooseneck lamp design adds an energy value of 30,000uW/cm? to the 1-3cm exposure range, greatly enhancing the curing of details such as the top of the model and the figure’s skirt.
Easy to Operate: Dual cleaning and curing modes can be easily selected at the touch of a button; the enhanced gooseneck lamp curing mode can be easily switched on and off with a single click. Cleaning and curing times can be adjusted from 1 to 30 minutes.
Quieter Environment: Through a more hermetic structural design and software optimisation, noise disturbances generated during the cleaning and curing process are reduced, creating a quieter and more comfortable working environment.
Brand new in original box

Show more